Balanced Power TransformersChoose your Transformer

Balanced Power TransformersChoose your Mounting/Hardware

Balanced Power TransformersCheck Out

The Balanced Power Transformers are designed with a center-tapped secondary winding which consists of two identical, mirrored secondary windings in series and an electrostatic shield. When the center tap is grounded, these two identical windings short circuit the equal amplitude but opposite phased noise current and greatly attenuate (low to medium frequency) common mode noise. The ground noise amplitude goes to zero, which eliminates audio to be free of noise interference. In addition, our balanced transformers are designed with very low flux density to further reduce the mechanical noise. Balanced Power Transformers are perfect for audio recording, production studios and high-end home entertainment systems.

balanced power transformersFeatures
• Class B (130C) Insulation
• Low Temperature Rise
• Excellent Voltage Regulation
• Low Mechanical Noise
• Electrostatic Shield
• Low EMR 
• Bifilar Wound Secondary Winding
• Low Profile
• Bare Transformer or with Optional Enclosure


Number of
PriceBT0250X250N/A5" x 2.5"
PriceBT0500X500N/A5.5" x 2.9"
PriceBT1000X1000N/A7.2" x 3.2"
PriceBT1500X1500N/A8.2" x 3.4"
PriceBT2000X2000N/A9.4" x 3.7"
PriceBT0250E25029.56" x 5.9" x 3.1"
PriceBT0500E500410.5" x 6.5" x 3.8"
PriceBT1000E1000612.0" x 8.6" x 3.9"
PriceBT1500E1500813.1" x 9.6" x 4.4"
PriceBT2000E2000813.1" x 9.6" x 4.4"
Need custom specifications for your transformer? Click here.

UL and CUL Agency Files
UL and CUL have issued the following reference (file) numbers for our construction approvals received for all our standard designs and over 500 custom designs.

Smaller transformers are supplied with one metal washer and two rubber pads, for power ratings up to 800VA. Larger transformers are typically supplied with an epoxy potted center with a hole for mounting.  Other mounting options are available:

The above transformers can be ordered mounted inside a NEMA enclosure with or without fuse, receptacle and line cord with plug.

Vertical Mounting
When vertical mounting of the transformer is required we recommend using our Omega or L- brackets. Learn more at our Mounting and Hardware section.

Safety Standard
UL 506 (Non-medical)
CSA C 22.2 No 66
Agency Reference
UL file E-98086C-UL file E-98086
Detailed datasheets are available for
all listed part numbers.
Caution - If you choose to apply your own mounting solution, remember that it is important that our transformer be mounted in such a way that the mounting screw and the metal chassis will not form a closed loop through the center and thereby create a shorted turn on the transformer.

Terms and Conditions

  • For larger quantity prices, please contact the factory directly.
  • Prices and data subject to change without prior notice
  • Delivery: Small quantities of standards are normally available from stock
  • 30-Day Return Policy of Undamaged Items - 15% Restocking Fee on Standard Transformers
  • 36 Month Product Warranty
  • Terms and Conditions