Industrial Control TransformersChoose your Transformer

Industrial Control TransformersChoose your Mounting/Hardware

Industrial Control TransformersCheck Out

The Industrial Control Panel Transformers are designed with very low temperature rise, excellent voltage regulation and extreme overload capacity of high momentary in-rush current demand by the contactors, relays and solenoids. The output voltage drop under high momentary in-rush current is also very low, which ensures satisfactory operation of contactors, relays and solenoids.

industrial control panel transformersFeatures
• Class B (130C) Insulation
• Low Temperature Rise
• Excellent Voltage Regulation
• Stiff output voltage at high momentary in-rush current
• Meets UL, IEC, EN and CE standards
• 60Hz and 50/60Hz designs
• Light weight
• Low profile; small dimensions
• Low EMR
• Low mechanical noise
• Toroidal Design UL506 recognized and C-UL certified to CSA C22.2 No.66

industrial control panel transformers flow chart

Please contact the factory or call us at (410) 860-0300 to obtain pricing for our standard line of Industrial Control Transformers.

UL and CUL Agency Files
UL and CUL have issued the following reference (file) numbers for our construction approvals received for all our standard designs and over 500 custom designs.

UL CUL certified

Smaller transformers are supplied with one metal washer and two rubber pads, for power ratings up to 800VA. Larger transformers are typically supplied with an epoxy potted center with a hole for mounting.  Other mounting options are available:

The above transformers can be ordered mounted inside a NEMA enclosure with or without fuse, receptacle and line cord with plug.

Vertical Mounting
When vertical mounting of the transformer is required we recommend using our Omega or L- brackets. Learn more at our Mounting and Hardware section.

Safety Standard
UL 506 
CUL Certified to CSA C 22.2 No 66

Agency Reference
UL file E-161696

Detailed datasheets are available for
all listed part numbers.
Caution - If you choose to apply your own mounting solution, remember that it is important that our transformer be mounted in such a way that the mounting screw and the metal chassis will not form a closed loop through the center and thereby create a shorted turn on the transformer.